Welcome to Jiangsu Pengfei Group Drying equipment Special website
Drying equipmentJiangsu Pengfei Group's drying equipment includes three drum dryers, rotary double drum dryers, and rotary dryers, which have the characteristics of compact structure, simple construction, reasonable layout, improved heat exchange rate between materials a
Keywords: Triple drum dryer, rotary double drum dryer, rotary dryer

Three cylinder dryer

Overview: The triple drum dryer is an efficient and energy-saving product improved on the basis of the single drum rotary dryer. The triple drum dryer has improved the internal structure of the original single drum dryer, increasing the pre drying of wet materials before entering the machine and extending the drying time of wet materials inside the machine. In addition, sealing, moisture retention, and reasonable supporting measures greatly improve the production capacity of the dryer. It has a compact structure, simple structure, reasonable layout, impr...

Tel: +86-513-88755311 88755027

    Main features

    1. High technical content, self insulation of the cylinder body, thermal efficiency up to 80% (the thermal efficiency of a single cylinder dryer is only 35%), saving 68% of coal compared to single cylinder drying, and increasing production by 100% 2. Shortening the overall length of a single drum dryer by 60% is beneficial for process layout. Reduce the building area of the factory and save about 40% of the project investment. Covering an area of approximately 20m2 3. Made of heat-resistant and wear-resistant alloy steel plate, which is four times more wear-resistant than ordinary steel plate. Long service life and easy maintenance 4. High thermal efficiency, outer cylinder temperature below 60 ℃ (single drum dryer outer cylinder temperature up to 150 ℃), low outlet temperature, and discharge temperature below 60 ℃ 5. Low export temperature is beneficial for extending the service life of dust removal equipment, and can be directly matched with gas box pulse bag filter 6. Hot blast stove can be matched with boiling furnace, coal injection furnace, and gas furnace.

    Technical Parameter

    Project Unit φ 2.0× 6m φ 2.5× 6.5m φ 2.7× 7m φ 3× 7m φ 3.2× 7m φ 3.6× 8m φ 4.2× 8.5m
    Outer cylinder diameter (m) 2.0 2.5 2.7 3 3.2 3.6 4.2
    Outer cylinder length (m) 6 6.5 7 7 7 8 8.5
    Cylinder volume (m3) 18.84 31.89 40.5 49.46 56.26 81.38 118
    Cylinder rotation speed (rpm) 3-10 3-10 3-10 3-10 3-10 3-10 3-10
    Material retention time (min) 12-30 12-30 12-30 12-30 12-30 12-30 12-30
    Initial moisture content of material (%) 6-25 6-25 6-25 6-25 6-25 6-25 6-25
    Final moisture content of materials (%) ≤ 1 ≤ 1 ≤ 1 ≤ 1 ≤ 1 ≤ 1 ≤ 1
    Maximum intake temperature (℃) 750-900℃ 750-900℃ 750-900℃ 750-900℃ 750-900℃ 750-900℃ 750-900℃
    Production capacity (T/H) Slag 20-25 25-30 30-35 35-10 40-45 50-65 70-85
    Fly ash 10-17 17-21 20-25 23-27 25-30 30-45 45-63
    Yellow sand 20-27 25-40 27-45 30-45 35-50 55-75 75-99
    Motor model Yr160m-4 Yr132m-4E Yr160m-4 Yr160m-4 Yr132m-5E Yr160m-4E Yr160m-4E
    Electric motor power (kw) 7.5× 2 11× 2 7.5× 4 7.5× 4 11× 4 15× 4 18.5× 4
    Gearbox model XWD-6 XWD-6 XWD-6 XWD-6 XWD-6 XWD-8 XWD-8
    Speed ratio of gearbox (I) 17-29 17-29 17-29 17-29 17-29 17-29 17-29
    Equipment weight (T) 25 32 35 38 43 57 77